Stapler how to load?
Open the stapler. Most staples are top load staplers. To open these, grip the base of the Stapler Machine, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.
until the stapler tray pops out slightly.
How to Use a Paper Stapler?
Preparing the Paper Stapler and Paper
1、Open the stapler. Most staples are top load staplers. To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly. Then, pull on the staple tray until it is fully extended.stapler tray pops out slightly. Then, pull on the staple tray until it is fully extended.
- Book Stapler will also have a release button on the back.
- Hold the base steady when opening a Books Stapler Machine.
- Some models may vary, but in general, you can open a stapler by pulling it open or by pushing a back button.
Load the stapler. Insert the recommended staples, placing the pointy legs first into the staple tray. To close top load staplers, push the top of the stapler down until it clicks into place. For back load staplers, push the stapler tray in to close it.
Gather up to 20 pieces of paper. This is the amount most manual desktop and electric staplers can bind, but heavy-duty staplers can handle up to 100 or more pieces. Be sure your papers are all facing the same way and are in the order you want to bind them in.
Put the upper left edge of the stack of paper in the stapler’s mouth. The staple is going to come out of the stapler ejection gap (located at the very end of the stapler tray), so place the part you want to staple under it.
- If you are using an electronic stapler, the staple will shoot out immediately.
- If the electronic stapler does not shoot the stapler out immediately, push your papers further back, and be sure it is plugged in.
- You will hear electronic staplers “click” when the papers are bound.
Press down firmly and quickly on the top of the stapler. Then, let go of the stapler’s top, and your papers should be bound.
Check to make sure that the staple has bound the papers. You can remove the staple if it is not in the location you wanted, if it is loose, or if it is bent. Pry open the staple legs, then pull the staple out, and try stapling it again.
Unjam the stapler, if necessary. Staplers often jam if you try to staple too many papers or if a staple bends in an unexpected way. Open up the stapler, and use tweezers, pliers, or a similar tool to pull out any jammed staples. Unplug electronic staplers before fixing any jams.
High Quality Staplers:
Post time: Oct-18-2018